◆Introduction Multifunctional heat press machine is consisted of 8accessories whichare:T-shirt heating plate(38*38cm), mug heating plate(10oz,11oz,12oz,17oz),cap heating plate and plate heating plate (Φ15& Φ12sizes).This machine enjoys mufti-functionin one machine,it can be used for transferringon t-shirt,mug,plate,cap and so on. Moreover，the heating accessory can bejoined .It can be circumvention180degrees and is convenient to take off the transferredmaterials and can be used for transferringon certain thick materials ；you can replace the heating plate easily and conveniently without using any special tools. ◆Usage 1．Turn up thehandle bar, let the machine open. Put the materials which you want to do the transfer on the working table, adjust the pressure (turn clockwise to add the pressure, turn anti-clockwise to reduce the pressure) 2．Open the machine, prepare the materials. (to avoid burning out, Pleasedon’t put the materials on the working table when it is in the process of heating ) 3．Connect the power line which comes with the machine, turn the power on ,the temperaturecontroller will check automatically ,the machines will work after 10secs，then you can set the time and temp,(for the first time pleaseset the right time and temp, more details you can refer tothe usage of the display of controller box.) 4．Set the temp and time, machine start heating up (p.s: arrive at 200degree,it needs about 15minutes) 5．When the temp arrives at which what we set ,put the materials on the working table, then turn down the handle bar, and the time begins to count,when the time’s up ,machine willalarm ,turn up the handle bar ,then you are done..